Get Adobe Flash player

Sizes

0.10 mm

Ultra-fine, ultra low flow atomizing brass hex nozzles with stainless steel insert that can be hand tightened and seal with an O-Ring. These 0.10 mm nozzles are ideal for use in high pressure systems in humid climates. This nozzle is not designed to be used at pressure below 34.48 bars. Typical flow rate is 0.002 m3/hr at 68.95 bars. This nozzle is great for humdification in a small greenhouse. This nozzle is easily cleanable and provides years of clog free misting.

0.15 mm

Ultra-fine, ultra low flow atomizing brass hex nozzles with a stainless steel insert that can be hand tightened and seal with an O-Ring. These 0.15 mm nozzles are ideal for use in high pressure systems in humid climates. This nozzle should not to be used at pressures below 34.48 bars. Typical flow rate is 0.003 m3/hr at 68.95 bars. This nozzle is easily cleanable and provides years of clog free misting.

0.20 mm

Ultra-fine atomizing brass hex nozzles with a stainless steel insert that can be hand tightened and seal with an O-Ring. These 0.20 mm nozzles are ideal for use in high pressure systems in humid climates. This nozzle should not to be used at pressures below 17.24 bars. Typical flow rate is 0.005 m3/hr. This nozzle is easily cleanable and provides years of clog free misting.

0.30 mm

Fine, low flow atomizing brass hex nozzles with stainless steel insert that can be hand tightened and seal with an O-Ring. These 0.30 mm nozzles are ideal for use in high pressure systems in arid climates. Typical flow rate is 0.006 m3/hr at 68.95 bars. This nozzle is great for humdification on patios. This nozzle is easily cleanable and provides years of clog free misting.

0.40 mm

Medium-fine atomizing brass hex nozzles with a stainless steel insert that can be hand tightened and seal with an O-Ring. These 0.40 mm nozzles are ideal for use in high pressure systems in humid climates. Typical flow rate is 0.009 m3/hr. This nozzle is easily cleanable and provides years of clog free misting.

0.50 mm

Medium atomizing brass hex nozzles with a stainless steel insert that can be hand tightened and seal with an O-Ring. These 0.50 mm nozzles are ideal for use in high pressure systems in humid climates. Typical flow rate is 0.012 m3/hr. This nozzle is easily cleanable and provides years of clog free misting.